CE-SPA Clarifier + Enzyme | Orenda Products

CE-SPA is a chitosan-based clarifier blended with CV-600 enzymes, specifically formulated for hot tubs and spas. The enzymes remove non-living organic waste and oils; the chitosan attracts particles to be filtered out. Removing organic waste is our Second Pillar of Proactive Pool Care.

CE-SPA Clarifier, like all Orenda Products, is all-natural: no synthetic polymers or dyes.

Hot tubs and spas have warm, agitated water. Normally those conditions cause excess bubbling and sometimes foaming with Orenda enzymes like CV-600 or even CE-Clarifier. CE-SPA was formulated specifically for these conditions to minimize the foaming and still deliver the results needed for clean water.

SPA-500 Directions

Shake the bottle well before adding.
Remove the filter from the system and clean it separately.
Turn on the Spa/Hot Tub circulation and jets.
Pour SPA-500 directly into the body of water (8oz. per 500 gallons of water).
Run system with all jets/pumps turned on for 5-10 minutes.
After 5-10 minutes, turn the system off for another 5-10 minutes.
After being off for 5-10 minutes, turn the whole system back on for another 5-10 minutes.
After 5-10 minutes of the whole system running, turn the system off and drain the water from the Spa/Hot Tub.
1. While draining the spa, thoroughly rinse the shell and run a water hose through the skimmer/suction line.
After Spa/Hot Tub has been completely drained:
1. Reinstall cleaned filter.
2. Refill with fresh water.
3. Adjust chemistry to Spa/Hot Tub manufacturer’s specifications. You can use the Orenda App to help with this.